No empty vessel

10.11.2017 |
November 10, 2017
MCD Elektronik GmbH |
MCD Elektronik develops blower test stand

Birkenfeld, Germany, August 14, 2017: The measurement and testing specialist MCD Elektronik got the order to develop an end-of-line test stand for blowers. These cross-flow fans are part of small heating units, that are integrated in air conditioning systems and floor heating systems of buses and trains. Multilevel blower testing, current and voltage measurements as well as density tests are performed with this testing device. The test stand is delivered on a trolley to be comfortably driven to the operation place. The operator contacts the blower via quick adaptions. Input and selection of individual production orders within serial production is performed by a touch screen monitor.

Functional testing of multilevel blower functions will then take place. For the DUT's measurements, the MCD ULC MSR functional card with programmable current sensors is used. Density test is performed via comparison procedures between input and output pressure. At the end of the testing procedure, which lasts between 12 and 30 seconds depending on the version of the heating device (multilevel performance), a label printer creates the device label. MCD's software "MCD Toolmonitor Order Management" documents the whole testing procedure and creates the corresponding shipment documents.

MCD was able to fall back on intern hardware and software products like the measurement software TestManager CE to control the test sequences and to integrate the data to the customers' QS system. The MCD Toolmonitor SerIO, ULC and Order Management are controlling the individual test functions. MCD's ULC Multifunctional Card is a multi-talent with its complex FPGA components, which provides many possibilities (e.g. A-D, D-A, logical analysis, counter, self-test, calibration, and many more) via USB interface.

Within this application, this card assumes the measurement of physical and temporal values, like current, curve progressions, voltage and pressure. A pressure station with valve terminals, filter regulators and pressure sensors from the company FESTO supplies the DUT application. By changing the device parameters and customizing of the fixtures, this test stand can easily be used for other products.

Density, functional and EOL tests of mechatronic assemblies can be performed with the current equipment, as well as multilevel blower testings.


Ms. Verena Hörter
+49 7231 78 405 0
MCD Elektronik GmbH
Hoheneichstr. 52
75217 Birkenfeld/Germany

marketing@mcd-elektronik.de

www.mcd-elektronik.com
shop.mcd-elektronik.com
MCD Elektronik GmbH
Hoheneichstr. 52 75217 Birkenfeld Germany Phone: +49 7231 78405-0 Fax: 78405-10 E-Mail Website Hall A1 Booth 254
Contact: Contact:

Company in Catalog
 
 
 
  • productronica
 
Highlights
active active active
for exhibitors
for visitors
for the press
Final report

That was productronica 2017

Full halls, constructive discussions and positive feedback. Experience the highlights of the 2017 exhibition all over again.

Final report

That was productronica 2017

Full halls, constructive discussions and positive feedback. Experience the highlights of the 2017 exhibition all over again.

That was productronica 2017

Full halls, constructive discussions and positive feedback. Experience the highlights of the 2017 exhibition all over again.

Exhibition sectors

The entire market showcases itself here

The only trade fair that depicts the entire value chain in electronics manufacturing.

Exhibition sectors

The entire market showcases itself here

The only trade fair that depicts the entire value chain in electronics manufacturing.

The entire market showcases itself here

The only trade fair that depicts the entire value chain in electronics manufacturing.

News

News

News